Ventilation Valve: Installation

WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL VENTILATION VALVE SUB-ASSEMBLY
1. Install the ventilation valve.
  1. Apply adhesive to 2 or 3 threads.
    
    Fig 1: Applying Adhesive On Threads Of Ventilation Valve
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    
    Adhesive:
    
    Part No. 08833-00070, THREE BOND 1324 or equivalent.
  2. Install the ventilation valve.
    Torque: 27 N*m (275 kgf*cm, 20 ft.*lbf)
INSTALL VENTILATION HOSE

Fig 3: Connecting Ventilation Hose To Ventilation Valve
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Connect the ventilation hose to the ventilation valve.
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )