Height Control Accumulator: Removal

DRAIN SUSPENSION FLUID AHC
1. Connect the hose to the bleeder plug for height control accumulator and loosen the bleeder plug.
  
  Fig 1: Connecting Hose To Bleeder Plug
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. After the fluid pressure has dropped and oil has drained out, tighten the bleeder plug and remove the hose.
  Torque: 6.9 N.m (70 kgf.cm, 61 in.lbf)
REMOVE FRONT LH DAMPING FORCE CONTROL ACTUATOR (See REMOVAL )
DISCONNECT CONNECTOR
REMOVE HEIGHT CONTROL ACCUMULATOR
1. Using SST, disconnect the inlet fluid line from the height control accumulator.
  SST 09023-38401
  
  Torque: 30 N.m (310 kgf.cm, 22 ft.lbf)
  
  Fig 2: Disconnecting Inlet Fluid Line From Height Control Accumulator Using SST
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST, disconnect the outlet fluid line from the height control accumulator.
  SST 09751-3601 1
  
  Torque: 15 N.m (155 kgf.cm, 11 ft.lbf)
  
  Fig 3: Disconnecting Outlet Fluid Line From Height Control Accumulator Using SST
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the nut, 3 bolts and height control accumulator.
  Torque: 29 N.m (300 kgf.cm, 22 ft.lbf)