Monitor Result (Mode 06 Data)
Refer to PRE-CHECK for detailed information.
The test value and test limit information are described as shown in the following table. Check the monitor result and test values after performing the monitor drive pattern (see READINESS MONITOR DRIVE PATTERN )
- TID (Test Identification Data) is assigned to each emissions-related component.
- TID (Test Limit Type):
- If TLT is 0, the component is malfunctioning when the test value is higher than the test limit.
- If TLT is 1, the component is malfunctioning when the test value is lower than the test limit.
- CID (Component Identification Data) is assigned to each test value.
- Unit Conversion is used to calculate the test value indicated on generic OBDII scan tools.
TID $01: Catalyst - Using HO2S on sensor 1 and 2
MONITOR RESULT (MODE 06 DATA)
| TLT | CID | Unit Conversion | Description of Test Value | Description of Test Limit |
|---|---|---|---|---|
| 0 | $01 | Multiply by 0.0078 [no dimension] | Catalyst deterioration level bank 1: Determined by waveforms of HO2S sensor 1 and sensor 2 | Malfunction criteria for catalyst deterioration |
| 0 | $02 | Multiply by 0.0078 [no dimension] | Catalyst deterioration level bank 2: Determined by waveforms of HO2S sensor 1 and sensor 2 | Malfunction criteria for catalyst deterioration |