Power Rear QUARTERWINDOW System: Inspection

INSPECT POWER QUARTER WINDOW SWITCH CONTINUITY

SWITCH POSITION SPECIFIED CONDITION

Switch position	Tester connection	Specified condition
CLOSE	3 - 4 5 - 6	Continuity
OFF	-	Continuity
OPEN	3 - 6 4 - 5	Continuity
Illumination Circuit	1 - 2	Continuity

Fig 1: Inspecting Power Quarter Window Switch Continuity

G02994079

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If continuity is not as specified, replace the switch.

Left side:
INSPECT POWER VENT WINDOW MOTOR OPERATION
1. Connect the battery positive (+) lead to terminal 1 and the battery negative (-) lead to terminal 2, and check that the window link moves to OPEN position.
  
  Fig 2: Inspecting Power Vent Window Motor Operation
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the polarity and check that the window link moves to CLOSE position.
If operation is not as specified, replace the window motor.

Fig 3: Checking Window Link Moves To CLOSE Position
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Right side:
INSPECT POWER VENT WINDOW MOTOR OPERATION
1. Connect the battery positive (+) lead to terminal 2 and the battery negative (-) lead to terminal 1, and check that the window link moves to OPEN position.
  
  Fig 4: Inspecting Power Vent Window Motor Operation
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the polarity and check that the window link moves to CLOSE position.
Fig 5: Checking Window Link Moves To Close Position
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002