LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2005 >> IS 300 Base, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension And Axle >> Toe Control Link >> Inspection

Toe Control Link: Inspection

  1. INSPECT TOE CONTROL LINK BALL JOINT BOOT FOR DAMAGE 
  2. INSPECT TOE CONTROL LINK BALL JOINT FOR ROTATION CONDITION 
    1. As shown in the illustration, flip the ball joint stud back and forth 5 times, before installing the nut.
    2. Using a torque wrench, turn the nut continuously 1 turn per 2-4 seconds and take the torque reading on the 5th turn.
      1. Turning torque: 
      2. 1.0-2.5 N.m (10-25 kgf.cm, 9-22 in.lbf) 
    Fig 1: Inspecting Toe Control Link Ball Joint For Rotation Condition
    G02949919Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals