LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2005 >> IS 300 Base, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension And Axle >> Front Shock Absorber >> Disposal

Front Shock Absorber: Disposal

  1. FULLY EXTEND SHOCK ABSORBER PISTON ROD 
  2. DRILL HOLE TO DISCHARGE GAS FROM CYLINDER 
    1. Place the shock absorber horizontally to prevent the oil from coming out.
    2. Using a drill, make a hole on the top of the shell as shown to discharge the gas inside.
    CAUTION:
    • When drilling, chips may fly out, work carefully.
    • The gas is colorless, odorless and non-poisonous.
    Fig 1: Identifying Drilling Hole Specification
    G02949714Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals