Front Lower Ball Joint: Installation

1. Install the lower ball joint to the steering knuckle with the 2 bolts.
   1. Torque: 113 N.m (1,150 kgf.cm, 83 ft.lbf) 
2. Connect the lower ball joint to the No. 1 lower suspension arm with the nut.
   1. Torque: 123 N.m (1,250 kgf.cm, 91 ft.lbf) 
3. Install a new cotter pin.

If the holes for the cotter pin are not aligned, tighten the nut further up to 60°.

1. Connect the tie rod end with the nut.
   1. Torque: 54 N.m (550 kgf.cm, 40 ft.lbf) 
2. Install a new clip.

If the holes for the clip are not aligned, tighten the nut further up to 60°.

Install the disc, brake caliper and 2 bolts.

1. Torque: 118 N.m (1,200 kgf.cm, 87 ft.lbf) 

1. Torque: 103 N.m (1,050 kgf.cm, 76 ft.lbf)