Section 30 (Starting): Starter: Installation

WARNING: This page is about a different car, the 2005 Lexus LX 470. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL STARTER
1. Install the engine wire protector to the starter with the bolt.
  Torque: 9.81 N.m (100 kgf.cm, 84 in.lbf)
  
  Fig 1: Installing Engine Wire Protector To Starter
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the starter wire with the nut.
  Torque: 9.81 N.m (100 kgf.cm, 84 in.lbf)
3. Connect the starter connector.
4. Connect the starter to the cylinder block.
5. Connect the engine wire with the bolt.
6. Install the starter with the 2 bolts.
  Torque: 39 N.m (400 kgf.cm, 29 ft.lbf)
Fig 2: Installing Starter And Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INTAKE MANIFOLD ASSEMBLY.
(See INSTALLATION )
INSTALL INTAKE AIR CONNECTOR.
INSTALL V-BANK COVER