On-Vehicle Repair

3UZ-FE Engine: (See  EXHAUST SYSTEM  ). 

1. Remove the bolt and O/D direct clutch speed sensor.
2. Remove the O-ring from the O/D direct clutch speed sensor.

1. Coat a new O-ring with ATF and install it to the O/D direct clutch speed sensor.
2. Install the O/D direct clutch speed sensor to the transmission case and torque the bolt.

   Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf) 

3UZ-FE Engine: (See  EXHAUST SYSTEM  ). 

Fig 1: Identifying O/D Direct Clutch Speed Sensor Connector

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002