LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2005 >> GS 430 >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension And Axle >> Front Shock Absorber >> Disposal

Front Shock Absorber: Disposal

  1. FULLY EXTEND SHOCK ABSORBER ROD 
  2. DRILL HOLE TO REMOVE GAS FROM CYLINDER 
    1. Place the shock absorber horizontally to prevent the oil from coming out.
    2. Using a drill, make a hole on the top of the shell as shown to discharge the gas inside.
      CAUTION: The gas coming out is harmless, but be careful of chips which may fly up when drilling.
      Fig 1: Drilling Hole To Remove Gas From Cylinder
      G02944465Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals