Sliding Roof System: Adjustment

Before making adjustments, remove the left and right sliding roof garnishes.

HINT:

After adjustment, reinstall the sliding roof garnishes.

Fig 1: Removing Sliding Roof Garnishes

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Using a torx driver, adjust the level difference by tightening or loosening the bolts.

Clearance: 0 +/- 2.0 mm (0 +/- 0.079 in.) 

Fig 2: Adjusting Level Difference

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Adjust by loosening the sliding roof installation nuts, and move the sliding roof bracket forward and backward.
   Fig 3: Adjusting Sliding Roof Bracket Forward & Back Ward

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. When the front or rear alignment is not correct, remove the glass and adjust the drive rail.
3. Using a screwdriver, slide the link forward or backward to align the 2 marks as shown in Fig 4.
4. Slide the bracket to the forefront with your hand.
   Fig 4: Sliding Link Forward Or Backward To Align Marks

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Adjust by loosening the sliding roof rear shoe installation nuts, and move the sliding roof to the right and left.

Fig 5: Moving Sliding Roof To Right & Left

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

(Difference in left and right clearance) 

Fig 6: Adjusting Difference In Left & Right Clearance

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Adjust by loosening the sliding roof installation nuts and readjust the sliding roof to the proper position.

Fig 7: Readjusting Sliding Roof To Proper Position

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002