Inspection Procedure
WARNING: This page is about a different car, the 2004 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
- PRESS "EJECT" AND CHECK OPERATION
- Press "EJECT" and check the operation.
- Press the cassette tape EJECT switch of the radio receiver assembly for 2 sec. or more and check that the cassette tape is ejected.
Standard: The cassette tape is ejected.
- Press the cassette tape EJECT switch of the radio receiver assembly for 2 sec. or more and check that the cassette tape is ejected.
- NG: REPLACE RADIO RECEIVER ASSY (See REPLACEMENT )
- OK: Go to next step.
- Press "EJECT" and check the operation.
- CHECK CASSETTE TAPE
- Check the cassette tape.
- Check that the ejected cassette tape does not have a peeling label, cassette body deformation and others.
Standard: No fault on the cassette tape.
- Check that the ejected cassette tape does not have a peeling label, cassette body deformation and others.
- NG: CASSETTE TAPE FAULTY
- OK: Go to next step.
- Check the cassette tape.
- REPLACE CASSETTE TAPE WITH ANOTHER AND RECHECK
- Replace the cassette tape with another and recheck.
- Replace the faulty cassette tape with a normal one to see if the same trouble occurs again.
Standard: Malfunction disappears.
- Replace the faulty cassette tape with a normal one to see if the same trouble occurs again.
- NG: REPLACE RADIO RECEIVER ASSY (See REPLACEMENT )
- OK: CASSETTE TAPE FAULTY
- Replace the cassette tape with another and recheck.