Inspection Procedure

WARNING: This page is about a different car, the 2005 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.

PRESS "EJECT" AND CHECK OPERATION
1. Press "EJECT" and check the operation.
  1. Press the CD EJECT switch of the radio receiver assembly for 2 seconds or more to see if the CD is ejected.
  Standard: CD is ejected.
Reference:

If the CD is not ejected, send the vehicle for repair.

Do not try to remove it by force.
1. NG: REPLACE RADIO RECEIVER ASSY
2. OK: GO TO NEXT STEP
CHECK IF A PROPER CD IS INSERTED
1. Check that a proper CD is inserted.
  1. Check that in what conditions the sound skipping occurs.
  Standard: Driving on the bad road.
1. NG: REPLACE RADIO RECEIVER ASSY
2. OK: GO TO NEXT STEP
REPLACE CD WITH ANOTHER AND RECHECK
1. Replace the CD with another and recheck.
  1. Check the installation condition of the radio receiver assembly.
  Standard: Installed properly.
1. OK: CD FAULTY
2. NG: REPLACE RADIO RECEIVER ASSY