Rear Speed Sensor: Removal

WARNING: This page is about a different car, the 2003 Lexus LX 470. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE SPEED SENSOR

Disconnect the speed sensor connector.
Remove the clamp bolt from the upper control bracket.
Torque: 13 N.m (130 kgf.cm, 9 ft.lbf)
Remove the 6 resin clips, holding the sensor wire harness from the frame, upper control arm and axle housing.

Fig 1: Removing Resin Clips
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Remove the mounting bolt and speed sensor.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)

Fig 2: Removing Mounting Bolt & Speed Sensor
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002