LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2004 >> RX 330 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 601 (Engine Control System - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection & Installation) >> Crankshaft Position Sensor >> Inspection

Crankshaft Position Sensor: Inspection

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT CRANKSHAFT POSITION SENSOR 
    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance 

      RESISTANCE SPECIFICATION

      Temperature Specified Condition
      Cold 1,630 to 2,740 Ω
      Hot 2,065 to 3,225 Ω
      Fig 1: Identifying Crankshaft Position Sensor Connector Terminals
      G05200247Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:
      • "Cold" and "Hot" mean the temperature of the coils themselves.
      • "Cold" is from -10°C (14°F) to 50°C (122°F) and "Hot" is from 50°C (122°F) to 100°C (212°F).

      If the resistance is not as specified, replace the sensor.

scientia non olet · About LEMON Manuals