LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2004 >> RX 330 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 571 (Starting) >> Starter >> Removal

Section 571 (Starting): Starter: Removal

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  3. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  4. REMOVE NO. 2 AIR CLEANER INLET  (See REMOVAL )
  5. REMOVE AIR CLEANER CAP SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE AIR CLEANER CASE SUB-ASSEMBLY  (See REMOVAL )
  7. REMOVE NO. 1 AIR CLEANER INLET  (See REMOVAL )
  8. REMOVE STARTER ASSEMBLY 
    1. Disconnect the terminal 50 connector from the starter assembly.
    2. Remove the nut and disconnect the wire harness from terminal 30.
    3. Remove the 2 bolts and starter assembly.
      Fig 1: Locating Starter Assembly Bolts
      G04975667Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals