Rear Room Light Assembly: Inspection

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT REAR ROOM LIGHT ASSEMBLY
1. Remove the rear room light assembly.
2. Connect the battery positive (+) lead to terminal 2 and negative (-) lead to terminal 1.
3. Turn on the rear room light switch.
4. Check that the light comes on.
  OK: Comes on
  
  If the light does not come on, replace the rear room light assembly.
  
  Fig 1: Identifying Rear Room Light Assembly Connector Terminals
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002