Personal Light Assembly: Inspection

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT PERSONAL LIGHT ASSEMBLY
1. Remove the personal light assembly.
2. Connect the battery positive (+) lead to terminal 17 and negative (-) lead to terminal 6.
3. Turn the personal light switch in DOOR position.
4. Check that the light comes on.
5. Connect the battery positive (+) lead, to terminal 17 and negative (-) lead to terminal 5.
6. Turn the personal light switch in ON position.
7. Check that the light comes on.
  OK: Comes on
  
  If the light does not come on, replace the personal light assembly.
  
  Fig 1: Identifying Personal Light Assembly Connector Terminals
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002