LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2004 >> RX 330 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 564 (Lighting) >> License Plate Light Assembly >> Removal

License Plate Light Assembly: Removal

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE BACK DOOR TRIM PANEL ASSEMBLY UPPER  (See DISASSEMBLY )
  2. REMOVE BACK DOOR TRIM PANEL ASSEMBLY  (See DISASSEMBLY )
  3. REMOVE BACK DOOR GARNISH  (See REMOVAL )
  4. REMOVE LICENSE PLATE LIGHT ASSEMBLY 
    1. Disengage the 2 claws and separate the license plate light assembly.
    2. Disconnect the connector and remove the license plate light assembly.
      Fig 1: Removing License Plate Light Assembly Claws
      G05273977Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals