LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2004 >> RX 330 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 564 (Lighting) >> High Mounted Stop Light Assembly >> Removal

High Mounted Stop Light Assembly: Removal

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE BACK WINDOW PANEL TRIM UPPER (w/o Power Back Door)  (See DISASSEMBLY )
  2. REMOVE BACK DOOR TRIM BOARD (w/ Power Back Door)  (See DISASSEMBLY )
  3. REMOVE BACK WINDOW PANEL TRIM UPPER (w/ Power Back Door)  (See DISASSEMBLY )
  4. REMOVE REAR SPOILER SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY 
    1. Install the strap to the connector of the high mounted stop light assembly.
    2. Remove the 2 screws.
    3. Pass the connector through the inside of the rear spoiler and remove the high mounted stop light assembly.

      HINT:

      Leave the strap inside the rear spoiler.

      Fig 1: Identifying High Mounted Stop Light Assembly Strap
      G05273980Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals