LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2004 >> RX 330 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 564 (Lighting) >> High Mounted Stop Light Assembly >> Installation

High Mounted Stop Light Assembly: Installation

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY 
    1. Install the strap to the connector of the high mounted stop light assembly.

      HINT:

      Leave the strap inside the rear spoiler.

    2. Pass the connector through the inside of the rear spoiler and install the high mounted stop light assembly with the 2 screws.
      Fig 1: Identifying High Mounted Stop Light Assembly Screws
      G05273981Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL REAR SPOILER SUB-ASSEMBLY  (See INSTALLATION )
  3. INSTALL BACK WINDOW PANEL TRIM UPPER (w/ Power Back Door) 
  4. INSTALL BACK DOOR TRIM BOARD (w/ Power Back Door) 
  5. INSTALL BACK WINDOW PANEL TRIM UPPER (w/o Power Back Door) 
scientia non olet · About LEMON Manuals