Headlight Assembly: Removal

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FRONT BUMPER COVER (See REMOVAL )
REMOVE HEADLIGHT ASSEMBLY (for Halogen Headlight)
1. Remove the 3 screws.
  
  Fig 1: Identifying Headlight Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Pull out the headlight assembly forward, then release the headlight bracket.
  
  Fig 2: Removing Headlight Bracket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disconnect the connectors and remove the headlight assembly.
REMOVE HEADLIGHT ASSEMBLY (for HID Headlight)
1. Remove the bolt and 3 screws.
  
  Fig 3: Identifying Headlight Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Pull out the headlight assembly forward, then release the headlight bracket.
  
  Fig 4: Removing Headlight Bracket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disconnect the connectors and remove the headlight assembly.
REMOVE FRONT NO. 2 BUMPER SIDE SUPPORT
1. Using needle nose pliers, release the 2 claws and remove the front No. 2 bumper side support from the headlight assembly.
  
  Fig 5: Locating Front Bumper Side Support No.2 LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002