Door Control Switch: Inspection

WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT DOOR CONTROL SWITCH (PASSENGER SIDE)

Measure the resistance according to the value(s) in the table below.

Fig 1: Identifying Door Control Switch (Passenger Side)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard resistance

TESTER CONNECTION SPECIFIED CONDITION REFERENCE TABLE

Tester Connection	Condition	Specified Condition
2 - 3	Lock	Below 1 Ω
2 - 3 1 - 2	OFF (Free)	10 kΩ or higher
1 - 2	Unlock	Below 1 Ω

HINT:

If the result is not as specified, replace the switch.

Apply battery voltage to the door control switch and check that the switch illuminates.

MEASUREMENT CONNECTION SPECIFIED CONDITION REFERENCE TABLE

Measurement Condition	Specified Condition
Battery positive (+) → Terminal 4 Battery negative (-) → Terminal 2	Illuminates

Fig 2: Identifying Door Control Switch Illuminates

HINT:

If the result is not as specified, replace the switch.