LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2004 >> RX 330 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 546 (Door Lock) >> Door Control Receiver >> Installation

Door Control Receiver: Installation

WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL DOOR CONTROL RECEIVER 
    1. Install the door control receiver with the bolt.
      Fig 1: Identifying Door Control Receiver With Bolt
      G05270533Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector.
  2. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER 
  3. INSTALL NO.2 ROOM LIGHT ASSEMBLY 
  4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY 
  5. INSTALL ROPE HOOK 
  6. INSTALL REAR FLOOR FINISH SIDE PLATE 
  7. INSTALL REAR SEAT SIDE COVER 
  8. INSTALL REAR NO.1 SEAT OUTER BELT ASSEMBLY 
    1. Install the rear No.1 seat outer belt assembly with the bolt.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

  9. INSTALL DECK SIDE TRIM COVER 
  10. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP 
  11. INSTALL REAR DOOR SCUFF PLATE 
  12. INSTALL DECK SIDE TRIM BOX LH 
  13. INSTALL DECK SIDE TRIM BOX RH 
  14. INSTALL REAR FLOOR FINISH PLATE 
  15. INSTALL BACK DOOR WEATHERSTRIP 
  16. INSTALL NO.3 DECK BOARD SUB-ASSEMBLY 
  17. INSTALL NO.2 DECK BOARD SUB-ASSEMBLY 
  18. INSTALL DECK FLOOR BOX REAR 
  19. INSTALL DECK FLOOR BOX FRONT 
  20. INSTALL DECK BOARD SUB-ASSEMBLY 
  21. INSTALL TONNEAU COVER ASSEMBLY 
scientia non olet · About LEMON Manuals