LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2004 >> RX 330 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 542 (Audio/Visual) >> Steering Pad Switch >> Removal

Steering Pad Switch: Removal

WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE: Wait for 90 seconds after disconnecting the cable to prevent the airbag working. (See PRECAUTION )
  2. REMOVE LOWER NO.2 STEERING WHEEL COVER  (See REMOVAL )
  3. REMOVE LOWER NO.3 STEERING WHEEL COVER  (See REMOVAL )
  4. REMOVE STEERING PAD  (See REMOVAL )
  5. REMOVE STEERING PAD SWITCH ASSEMBLY 
    1. Disconnect each connector.
    2. Remove the screw.
    3. Disengage the 2 claws and the pin.
      Fig 1: Identifying Claws & Pin On Steering Pad Switch LH
      G05270737Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the steering pad switch LH.
    5. Remove the screw.
    6. Disengage the 2 claws and the pin.
      Fig 2: Identifying Claws & Pin On Steering Pad Switch RH
      G05270738Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    7. Remove the steering pad switch RH.
scientia non olet · About LEMON Manuals