LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2004 >> RX 330 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 542 (Audio/Visual) >> Network Gateway Ecu >> Removal

Network Gateway Ecu: Removal

WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE FRONT DOOR SCUFF PLATE RH  (See REMOVAL )
  3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH  (See REMOVAL )
  4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY  (See REMOVAL )
  6. REMOVE NETWORK GATEWAY ECU 
    1. Disconnect the connector.
    2. Remove the screw and the network gateway ECU.
      Fig 1: Identifying Network Gateway ECU Screw
      G05270734Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals