Combination Meter: Removal

WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working (See PRECAUTION ).
REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
1. Disengage the 4 clips and remove the instrument cluster finish panel sub-assembly.
  
  Fig 1: Identifying Instrument Cluster Finish Panel Sub-Assembly And Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE COMBINATION METER ASSEMBLY
1. Remove the 4 screws.
2. Pull out the combination meter assembly, and disconnect the connectors.
  
  Fig 2: Identifying Combination Meter Assembly And Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002