LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2004 >> IS 300 Base, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock/Vehicle Skid Control >> Bleeding Brake System >> Master Cylinder

Master Cylinder

NOTE: If the master cylinder has been disassembled or if the reservoir becomes empty, bleed the air from the master cylinder.
  1. Remove the air cleaner assembly with hose.
  2. Disconnect the brake lines from the master cylinder with special tool (09023-00100).
  3. Slowly depress the brake pedal and hold it.
  4. Block off the outer holes with your fingers and release the brake pedal.
  5. Repeat steps  3 and  4 several times.
  6. Connect the brake lines and install the air cleaner assembly with hose. Bleed brake lines. See BRAKE LINE .
  7. Check the fluid level in reservoir and add fluid if necessary.
scientia non olet · About LEMON Manuals