Height Control Reservoir ASSY: Replacement

HINT:

COMPONENTS: COMPONENTS 

1. DISCONNECT HEIGHT CONTROL TUBE NO.2 
   1. Remove the holder.
   2. Spread the clip and slowly pull the height control tube No.2 straight out.
   3. Remove the 2 O-rings.
2. DISCONNECT HEIGHT CONTROL TUBE NO.6 
   1. Using SST, disconnect the height control tube No.6.
      1. SST 09730-00010

      NOTICE: 

      Refer to PRECAUTION of removal and installation of the height control tube (  SUSPENSION CONTROL SYSTEM  ). 

   2. Remove the 2 O-rings, the plate and the connector No.2.
3. DISCONNECT HEIGHT CONTROL TUBE NO.7 
   1. Using SST, disconnect the height control tube No.7.
      1. SST 09730-00010

      NOTICE: 

      Refer to PRECAUTION of removal and installation of the height control tube (  SUSPENSION CONTROL SYSTEM  ). 

   2. Remove the 2 O-rings, the plate and the connector No.2.
4. REMOVE HEIGHT CONTROL RESERVOIR ASSY 
   1. Remove the 2 bolts and the height control reservoir assy.
5. INSTALL HEIGHT CONTROL RESERVOIR ASSY 
   1. Install the height control reservoir assy with the 2 bolts.
      1. Torque: 29 N.m (300 kgf.cm, 21 ft.lbf) 
6. CONNECT HEIGHT CONTROL TUBE NO.7 
   1. Install 2 new O-rings, a new plate, a new connector No.2, and connect the height control tube No.7.

   NOTICE: 

   Refer to PRECAUTION of removal and installation of the height control tube (  SUSPENSION CONTROL SYSTEM  ). 

7. CONNECT HEIGHT CONTROL TUBE NO.6 
   1. Install 2 new O-rings, a new plate, a new connector No.2, and connect the height control tube No.6.

   NOTICE: 

   Refer to PRECAUTION of removal and installation of the height control tube (  SUSPENSION CONTROL SYSTEM  ). 

8. CONNECT HEIGHT CONTROL TUBE NO.2 
   1. Coat 2 new O-rings with MP grease.
   2. Push the height control tube No.2 in straight to connect it until the clip makes "click" sound.
   3. Install the holder.
9. INSPECT AIR LEAK (  SUSPENSION CONTROL SYSTEM  )