Inspect Multi Display Assembly Circuit
Disconnect the connector from the multi display assembly and inspect the connector on the wire harness side, as shown in the table.
SPECIFIED CONDITION
| Tester connection | Condition | Specified condition |
|---|---|---|
| 8 - Ground | Constant | Continuity |
| 1 - Ground | Constant | Battery positive voltage |
| 3 - Ground | Ignition switch LOCK | No voltage |
| 3 - Ground | Ignition switch ACC or ON | Battery positive voltage |
If the circuit is as specified, replace the multi display assembly. If the circuit is not as specified, inspect the circuits connected to other parts.