Inspection Procedure

WARNING: This page is about a different car, the 2005 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CD
1. Check for dirt on the CD surface.
OK: The CD is clean.

HINT:

If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

NOTE: Do not use a conventional record cleaner or anti-static preservative.

Fig 1: Cleaning CD
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. NG: CLEAN CD
OK: Go to next step.
CHECK CD
1. Check that the CD is not deformed or cracked.
OK: No deformations or cracks appear on the CD.

Fig 2: Identifying Cracked Or Deformed CD
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. NG: REPLACE CD
OK: Go to next step.
CHECK USING ANOTHER CD
1. Check using another CD.
  1. Check if the problem recurs using another CD.
OK: The problem does not recur.
1. OK: REPLACE CD
NG: Go to next step.
CHECK RADIO AND NAVIGATION ASSY
1. Check the radio and navigation assy installation condition.
  1. Check that the radio and navigation assy is properly installed (see RADIO RECEIVER ASSY ).
OK: Radio and navigation assy is properly installed.
1. NG: REINSTALL RADIO AND NAVIGATION ASSY PROPERLY
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE