LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2003 >> LS 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 541 (Exterior/Interior Trim) >> LH Step Sub-ASSY >> Replacement

LH Step Sub-ASSY: Replacement

WARNING: This page is about a different car, the 2004 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

On the RH side, use the same procedures as on the LH side.

  1. REMOVE LH STEP SUB-ASSY 
    1. Remove the 6 bolts holding the side step assy to the side step brackets.
    2. w/ Step lamp:
      1. Disconnect the step lamp wiring connector.
    3. Remove the side step assy.
  2. REMOVE SIDE STEP BRACKET 
    1. Remove the 6 bolt and 3 brackets.
  3. INSTALL SIDE STEP BRACKET 
    1. Install the 3 brackets with the 6 bolts.
      1. Torque: 19.5 N.m (199 kgf.cm, 14 ft.lbf) 
  4. INSTALL LH STEP SUB-ASSY 
    1. Install the step sub-assy with the 6 bolts.
      1. Torque: 5.0 N.m (51 kgf.cm, 44 in. lbf) 
scientia non olet · About LEMON Manuals