Inspection Procedure

WARNING: This page is about a different car, the 2004 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

REPLACE CD WITH ANOTHER AND RECHECK
1. Replace the CD with normal one and check it the same trouble occurs again.
1. Check the installation condition of the radio receiver assembly.
Standard: The operation returns to be normal.

OK: CD FAULTY

NG: Go To Next Step
CHECK WHEN THIS HAPPENS
1. Check when this happens.
1. Check that in what condition (place) sound skips.
Cause: Driving on the bumpy road.

OK: Go To Step 4

NG: Go To Next Step
COMPARE IT WITH ANOTHER CAR OF SAME MODEL
1. Compare it with another vehicle of the same model.
1. Compare with the vehicle of the same type which does not have a trouble to see if there is any difference in the condition of trouble occurrence.
Standard: No difference found.

OK: SETTING

NG: Go To Next Step
CHECK OF RADIO RECEIVER ASSEMBLY INSTALLATION
1. Check of the radio receiver assembly installation.
1. Check the installation condition of the radio receiver assembly.
Standard: Installed properly.

NG: INSTALL THE RADIO RECEIVER ASSEMBLY PROPERLY

OK: Go To Next Step
DID TEMPERATURE IN CABIN CHANGE RAPIDLY?
1. Did the temperature in the cabin change rapidly?
1. Check whether or not rapid temperature change occurred in the cabin.
Cause: Rapid temp. change.

Reference:

Rapid temperature change my cause condensation inside the CD player, which may affect its normal operation.

OK: CONDENSATION DUE TO TEMPERATURE CHANGE (LEAVE IT AS IT IS FOR A WHILE BEFORE USING)

NG: CHECK AND REPLACE RADIO RECEIVER ASSY