Wiper/Washer Switch Circuit
Disconnect the connector from the motor and inspect the connector on the wire harness side. See CONNECTOR IDENTIFICATION . See INSPECTING WIPER/WASHER SWITCH CIRCUIT table. If the circuit is not as specified, inspect the circuits connected to other parts.
INSPECTING WIPER/WASHER SWITCH CIRCUIT
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 2 - Ground | Constant | Continuity |
| 17 - Ground | Ignition Switch LOCK Or ACC | No Voltage |
| 17 - Ground | Ignition Switch ON | B+ Voltage |