LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2003 >> IS 300 Base, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock/Vehicle Skid Control >> Bleeding Brake System >> Abs & Traction Actuator Assembly

Abs & Traction Actuator Assembly

  1. Remove the reservoir cap.
  2. Install Special Tool (09992-00242/00350) to the reservoir. Connect the vinyl tube to the bleeder plug of the ABS & TRACTION actuator.
  3. Using special tool, apply a pressure of 14.2 psi (98.1 kPa) to the reservoir.
  4. Loosen the bleeder plug. Bleed the air out of the ABS & TRACTION actuator then tighten the bleeder plug to specification. See TORQUE SPECIFICATIONS .
  5. Check fluid level in reservoir and add fluid if necessary.
scientia non olet · About LEMON Manuals