DTC P0420: Catalyst System Efficiency Below Threshold (Bank 1) Or DTC P0430: Catalyst System Efficiency Below Threshold (Bank 2): Notes

CAUTION: If ECM replacement is instructed in following testing, always ensure ECM harness connector and ground circuit are okay. If either are suspect, repair and repeat testing to confirm ECM malfunction. If ECM is replaced, ECM must be programmed with proper ignition key code for engine immobilizer system. For programming procedures, see COMPUTER RELEARN PROCEDURES - LEXUS article in GENERAL INFORMATION.

NOTE: Bank 1 refers to bank which includes cylinder No. 1. Bank 2 refers to bank without cylinder No. 1. Heated oxygen sensor 1 refers to sensor closest to engine block. Heated oxygen sensor 2 refers to sensor farthest from engine block.