Service Data

STARTING & CHARGING SERVICE DATA

Starter	Rated voltage and output power			12 V 2.0 kW
	No-load characteristics		Current	100 A or less at 11.5 V
	Brush length		Standard	15.0 mm (0.591 in.)
	Brush length		Minimum	9.0 mm (0.354 in.)
	Spring installed load		Standard	21.5 - 27.5 N (2.2 - 2.8 kgf, 4.8 - 6.2 lbf)
	Spring installed load		Minimum	12.7 N (1.3 kgf, 2.9 lbf)
	Commutator	Diameter	Standard	35.0 mm (1.378 in.)
		Diameter	Minimum	34.0 mm (1.339 in.)
		Undercut depth	Standard	0.7 mm (0.028 in.)
		Undercut depth	Minimum	0.2 mm (0.008 in.)
		Circle runout	Maximum	0.05 mm (0.0020 in.)
	Field frame	Shunt coil resistance	at 20°C (68°F)	1.5 - 1.9 ohm
Battery	Maintenance-free Voltage		at 20°C (68°F)	12.5-12.9V
Generator	Rated output			12V 130A
	Rotor coil resistance		at 20 °C (68°F)	2.3 - 2.7 ohm
	Slip ring diameter		Standard	14.2 - 14.4 mm (0.559 - 0.567 in.)
	Slip ring diameter		Minimum	14.0 mm (0.551 in.)
	Brush exposed length		Standard	10.5 mm (0.413 in.)
	Brush exposed length		Minimum	4.5 mm (0.177 in.)
Voltage regulator	Regulating voltage			13.2-14.8 V