Rear Seat: Installation

HINT:

Before installation, confirm that the seat belts are positioned correctly.

1. Mount the seatback assembly to the body.

   HINT:

   Hook the frames on the stud bolts on the body side.

   Fig 1: Installing Seatback Assembly

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Rip the seatback cover open and install the nut.
   Fig 2: Installing Bolts To Seatback Assembly

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   HINT:

   Use the same manner described above to the other side.

   Torque: 18 N.m (185 kgf.cm, 13 ft.lbf) 

3. Install the 4 bolts.

   Torque: 18 N.m (185 kgf.cm, 13 ft.lbf) 

4. Install the seat belt to the shoulder belt guide.

1. Pass the seat cushion wire to seatback.
2. Push down the cushion to install the hook to the body panel.

   HINT:

   Confirm that the seat is installed firmly.