Inspection Procedure
- Check the power window switch circuit using DTC check. (Refer to DTC B1221/21, DTC B1222/22, DTC B1223/23, DTC B1224/24, DTC B1225/25, DTC B1226/26, DTC B1241/41 OR DTC B1252/52
)
- OK: Proceed to next circuit inspection shown on problem symptoms table. (See POWER WINDOW CONTROL SYSTEM and OTHERS under PROBLEM SYMPTOMS TABLE).
- OK: Go to next step.
- Check the power window switch. (See INSPECTION
in Power Window Control System article)
- NG: Replace the power window switch.
- OK: Go to next step.
- Check wire harness and connector between power window switch and rear left door ECU.
- NG: Repair or replace wire harness or connector.
- OK: Go to next step.
- Check wire harness and connector between power window switch and power window master switch.
- NG: Repair or replace wire harness or connector.
- OK: Proceed to next circuit inspection shown on problem symptoms table. (See POWER WINDOW CONTROL SYSTEM and OTHERS under PROBLEM SYMPTOMS TABLE).