Ball Joint Rotation Checking
Inspect ball joints for wear. Move ball joint fully back and forth 5 times. Install nut and use torque wrench to rotate. Turn nut continuously at one turn every 2-4 seconds. Read torque on fifth turn. Replace ball joint if rotating torque exceeds specification or there is unusual resistance or looseness. See BALL JOINT ROTATING TORQUE SPECIFICATIONS table.
BALL JOINT ROTATING TORQUE SPECIFICATIONS
| Application | INCH Lbs. (N.m) |
|---|---|
| Lower Ball Joint | .9-26 (.1-3) |
| Stabilizer Bar Link Ball Joint | .4-13 (.05-1.5) |
| Upper Ball Joint | 9-30 (1.0-3.4) |