Using Hand-Held Tester
WARNING: This page is about a different car, the 2003 Lexus IS 300 and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
- Prepare the hand-held tester.
- Connect the hand-held tester to the DLC3. See Figure.
- Turn the ignition switch ON and push the hand-held tester main switch ON.
- Use the hand-held tester to check the DTCs and freeze frame data, note them down. (For operating instructions, see the hand-held tester instruction book).
- See DIAGNOSTIC TROUBLE CODE INDEX table to confirm the details of the DTCs.