Headlight Cleaner Relay
WARNING: This page is about a different car, the 2002 Lexus GS 430 and 2002 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the headlight cleaner relay operation.
- Check that no continuity exists between terminals No. 2 and No. 5. See CONNECTOR IDENTIFICATION .
- Connect the positive (+) lead from the battery to terminals No. 1 and No. 5, and the negative (-) lead to terminal No. 3.
- Connect the negative (-) lead from the battery to terminal No. 4, and check that continuity exists between terminals No. 2 and No. 5 for 0.9-1.1 seconds, then no continuity exists.
- If the operation is not as specified, replace the motor.