Rocker Panel Molding: Replacement

WARNING: This page is about a different car, the 2004 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

The installation procedures are the removal procedures in reverse order.
Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.

REMOVE ROCKER PANEL MOLDING PROTECTOR NO. 2
1. Remove the screws, 2 clips and rocker panel molding protector.
REMOVE ROCKER PANEL MOLDING LH
1. Remove the 2 screws and 5 clips.
  
  Fig 1: Removing Screws & Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 5 screws, 5 clips and molding.
  
  Fig 2: Removing Screws, Clips & Molding
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002