LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2002 >> SC 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Servicing A/T) >> Adjustments >> Park/Neutral Position Switch

Park/Neutral Position Switch

WARNING: This page is about a different car, the 2004 Lexus LX 470 and 2003 Lexus LX 470. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that engine can only be started with shift lever in the "N" or "P" positions, not in any other position. If engine can be started in any position other than "N" or "P", adjust Park/Neutral Position (PNP) switch. Go to next step.
  2. Adjust PNP switch using the following steps:
    1. Loosen bolt of PNP switch and set shift lever to "N" position.
    2. Align the groove and neutral basic line. See Fig 1.
    3. Hold switch in position and tighten bolt to 10 ft. lbs. (13 N.m).
    4. After adjustment, perform inspection as described in step  1.
Fig 1: Aligning PNP Switch Groove To Neutral Basic Line
G00218279Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals