LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2002 >> RX 300 AWD >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Removal & Installation >> Strut Assembly >> Disassembly

Strut Assembly: Disassembly

    NOTE: DO NOT use an impact wrench. It will damage the Special Tool.
  1. Install 2 nuts and a bolt to the bracket at the lower part of the shock absorber, and secure it in a vise. Using Special Tool (09727-30021), compress the coil spring.
  2. Remove the nut, collar and suspension support. Remove the coil spring, spring bumper and lower insulator.
  3. Compress and extend the shock absorber rod, and check that there is no abnormal resistance or unusual operation sound. If there is any abnormality, replace the shock absorber with a new one.
scientia non olet · About LEMON Manuals