Combination Switch: Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2001 Lexus RX 300, 2001 Lexus LX 470, 2001 Lexus LS 430, 2001 Lexus IS 300, and 2001 Lexus GS 430. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
During installation, if spiral cable mating mark is not properly aligned, steering wheel may not turn completely, or flat cable inside spiral cable may be severed, disabling SRS.
Ensure front wheels are in straight-ahead position. Install combination switch. Turn spiral cable counterclockwise until it stops. Turn spiral cable clockwise about 3 turns until colored mating mark is aligned. See Fig 1. To complete installation, reverse removal procedure.