Light Control Switch Circuit
- Connector Disconnected -
Disconnect the connector from the combination switch and inspect the connector on the wiring harness side. See CONNECTOR IDENTIFICATION . See INSPECTING LIGHT CONTROL SWITCH CIRCUIT (CONNECTOR DISCONNECTED) table. If the circuit is not as specified, inspect the wiring harness. See HEADLIGHTS
under SYSTEM WIRING DIAGRAMS in ELECTRICAL.INSPECTING LIGHT CONTROL SWITCH CIRCUIT (CONNECTOR DISCONNECTED)
Tester Connection Condition Specified Condition 13 - Ground Constant B+ Voltage 14 - Ground Constant B+ Voltage - Connector Connected -
Connect the wiring harness side connector to the combination switch and inspect the connector from the back side. See CONNECTOR IDENTIFICATION . See INSPECTING LIGHT CONTROL SWITCH CIRCUIT (CONNECTOR CONNECTED) table. If the circuit is not as specified, inspect the wiring harness. See HEADLIGHTS
under SYSTEM WIRING DIAGRAMS in ELECTRICAL.INSPECTING LIGHT CONTROL SWITCH CIRCUIT (CONNECTOR CONNECTED)
Tester Connection Condition Specified Condition 16 - Ground Constant Continuity 13 - Ground Light Control Switch OFF Or TAIL B+ Voltage 13 - Ground Light Control Switch HEAD No Voltage 14 - Ground Light Control Switch OFF B+ Voltage 14 - Ground Light Control Switch TAIL Or HEAD No Voltage