LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2002 >> GS 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 340 (Instrument Panel) >> Removal

Section 340 (Instrument Panel): Removal

WARNING: This page is about a different car, the 2003 Lexus GS 430 and 2003 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT PILLAR GARNISHES 
  2. REMOVE FRONT DOOR SCUFF PLATES 
  3. REMOVE STEERING WHEEL (See  STEERING WHEEL  ) 
  4. REMOVE STEERING COLUMN COVER 
    1. Remove the 3 screws.
    2. Remove the steering column covers.
  5. REMOVE COMBINATION SWITCH 
    Fig 1: Removing Combination Switch
    G03598971Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE END PAD 

    Using a screwdriver, remove the end pad.

    HINT:

    Tape the screwdriver tip before use.

    Fig 2: Removing End Pad
    G03598972Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE NO. 1 UNDER COVER 
    1. Remove the 2 screws.
    2. Remove the No. 1 under cover.
    Fig 3: Removing No. 1 Under Cover
    G03598973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE NO. 1 SAFETY PAD 
    1. Remove the 2 screws and hood lock control.
    2. Remover the 4 bolts and screw.
    3. Remove the No. 1 safety pad.
  9. REMOVE PARKING BRAKE HANDLE 
  10. REMOVE NO. 1 SWITCH HOLE BASE 
    Fig 4: Removing No. 1 Switch Hole Base
    G03598974Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE STEERING COLUMN 
    1. Remove the 4 nuts.

      Torque:  25 N.m (250 kgf.cm, 19 ft.lbf)

    2. Disconnect the spring from the brake pedal.
    3. Remove the steering column.
  12. REMOVE CLUSTER FINISH PANEL 

    HINT:

    Tape the screwdriver tip before use.

  13. REMOVE COMBINATION METER 
    1. Remove the 4 screws.
    2. Remove the meter, then disconnect the connectors.
    Fig 5: Removing Combination Meter
    G03598975Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. REMOVE NO. 2 UNDER COVER 

    Using a screwdriver, remove the No. 2 under cover.

    HINT:

    Tape the screwdriver tip before use.

    Fig 6: Removing No. 2 Under Cover
    G03598976Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. DISCONNECT AIRBAG CONNECTOR 
    NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.
    1. Remove the airbag connector from the plate.
    2. Disconnect the airbag connector.
    Fig 7: Disconnecting Airbag Connector
    G03598977Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. REMOVE GLOVE COMPARTMENT PANEL ASSEMBLY 
    1. Remove the 2 bolts.
    2. Open the glove compartment door, then remove the 3 screws.
    3. Remove the glove compartment panel assembly.
  17. REMOVE CD CHANGER 
    1. Remove the 3 nuts.
    2. Disconnect the connector and remove the CD changer bracket.
    Fig 8: Removing CD Changer
    G03598978Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  18. REMOVE ASH RECEPTACLE 
  19. REMOVE NO. 2 REGISTER 
    1. Using a screwdriver, remove the No. 2 register.

      HINT:

      Tape the screwdriver tip before use.

    2. Disconnect the connector.
    Fig 9: Removing No. 2 Register
    G03598979Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  20. REMOVE AUDIO 
    1. Remove the 2 bolts and 2 screws.
    2. Disconnect the connector, then remove the audio.
  21. REMOVE CLUSTER FINISH PANEL 
    1. Using a screwdriver, pry out the cluster finish panel.

      HINT:

      Tape the screwdriver tip before use.

    2. Disconnect the connectors.
    Fig 10: Removing Cluster Finish Panel
    G03598980Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  22. REMOVE CONSOLE BOX CARPET 
  23. REMOVE LOWER REAR CONSOLE BOX 
  24. REMOVE REAR CONSOLE ARMREST 
  25. REMOVE NO. 3 CONSOLE BOX MOUNTING BRACKET 
  26. REMOVE CONSOLE BOX 
  27. REMOVE NO. 1 CONSOLE BOX DUCT 
  28. REMOVE NO. 7 HEATER TO REGISTER 
  29. REMOVE INSTRUMENT PANEL SAFETY PAD 
    1. Remove the 5 bolts and nut and screw.
    2. Remove the instrument panel safety pad.
    Fig 11: Removing Instrument Panel Safety Pad
    G03598981Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  30. REMOVE NO. 1 BRACE 
  31. REMOVE NO. 2 BRACE 
  32. REMOVE REINFORCEMENT 
    1. Remove the 5 nuts and 4 bolts.
    2. Remove the reinforcement.
  33. REMOVE LOWER DEFROSTER NOZZLE 
scientia non olet · About LEMON Manuals