Inspection Procedure
WARNING: This page is about a different car, the 2004 Lexus GS 430 and 2004 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
- Check the ECU-IG fuse.
- NG: Replace the fuse.
- OK: Go to Next step
- Check multi display.
PREPARATION:
Disconnect the multi display connector.
CHECK:
Check voltage terminals +B.
OK:
+B: 10 - 14 V
CHECK:
Check voltage terminal ACC when turn ignition switch ACC or ON position.
OK:
ACC: 10-14 V
CHECK:
Check continuity terminal GND1.
OK:
GND1: Continuity
- NG: Replace or repair wire harness or connector.
- OK: GO to next step.
Replace the multi display.