Telltale Light Assembly
Inspect the telltale light assembly continuity. See CONNECTOR IDENTIFICATION . See INSPECTING TELLTALE LIGHT ASSEMBLY CONTINUITY table. If the continuity is not as specified, replace the telltale light assembly.
INSPECTING TELLTALE LIGHT ASSEMBLY CONTINUITY
| Switch Position | Tester Connection | Condition |
|---|---|---|
| ODO/TRIP Switch Free | 3 - 10 | No Continuity |
| ODO/TRIP Switch Pushed In | 3 - 10 | Continuity |
| RESET Switch Free | 8 - 10 | No Continuity |
| RESET Switch Pushed In | 8 - 10 | Continuity |
| Turn Signal Switch RIGHT | 4 - 10 | Continuity |
| Turn Signal Switch LEFT | 9 - 10 | Continuity |